£0.00
| Items (0)
MRP Ribbon Coil (29" Boost / 150mm / 51mm Offset) - EX DEMO
Hover over image to zoom.

MRP Ribbon Coil (29" Boost / 150mm / 51mm Offset) - EX DEMO

  code:ribbonexdemo29
Now £549.00
Was: £849.00 You Save: £300.00 (35%)
Item out of StockItem In Stock | Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

These Ribbon Coil forks have been used as a demo set over the last year. They've been used a fair bit but are in generally excellent condition. There are a couple of slight scuffs here and there as would be expected. The steerer has been cut down slightly but was kept long to fit as many customer's bikes as possible, Steerer length is 210mm. The forks come with a star nut fitted. Fork comes with 3 weight springs, the medium spring is currently fitted.

ABOUT THE RIBBON COIL

The Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life, and consistent feel that you get with a coil spring.

This, in a package with a negligible or even nonexistent weight penalty over air forks in its class.

Every Ribbon Coil ships with three standard spring rates (soft, medium, and firm) and two additional springs (extrasoft and extra-firm) are available separately. The full range of springs covers riders from 125-250 lbs. Fine-tuning of spring rate comes courtesy of an external preload adjustment.

Included with the Ribbon Coil is MRP’s acclaimed Ramp Control™ system; a speed-sensitive ending-stroke adjustment that allows you quickly and easily isolate and tune your preferred amount of bottom-out support on-the-fly.

Just 203 g (0.45 lbs.) heavier than the air-sprung Ribbon, the Ribbon Coil’s 4.6 lb. weight bests many of its air-sprung competitors and beats aftermarket coil-converted forks. It’s an easily justifiable compromise for hard-charging trail riders and park rats in exchange for consistent and impeccable performance, day-in and day-out.

Like all MRP forks, the Ribbon Coil is precisely assembled in MRP’s Grand Junction, Colorado factory.

All forks undergo a rigorous QC process, that includes individual dyno testing, before arriving in the hands of end users. Like its air-sprung sibling, the Ribbon Coil is offered in two chassis sizes (27.5” or 27.5+/29”) with ten standard decal colour options, and with either QR-style or bolt-on 15x110 axles. With the addition of either coil or air-spring, and the above options, MRP suspension is truly the suspension of choice for those that demand the best.The Ribbon is designed for enduro racing and aggressive trail riding.

  • Wheel Size: 29"
  • Travel: 150mm
  • Offset: 51mm
  • Tyre clearance: up to 29 x 2.5
  • Axle: Boost (110 x 15mm spacing)
  • Stanchions: 35mm
  • Rotor Size - 180mm minimum
  • Lower leg pressure relief valves
  • Internally adjustable travel (from 140mm - 160mm)
  • 8 - position high efficiency compression damper
  • Externally adjustable preload and ramp control
  • Speed sensitive Rebound damping, shimmed architecture
  • Low friction wiper seals; reduced running friction by up to 18% (low speed floor test)
Place your order before 2.00pm (Mon-Fri) for same day dispatch. All UK orders are sent by Royal Mail 1st Class post or 48 hour couriers. European orders use Royal Mail Airmail.
 

Postage costs:

UK
- £1.99 (for orders up to £9.99).
- £0.99 (for orders from £10.00 to £19.99).
- FREE (for orders over £20.00).
 
Europe
- £4.99 (for any order value).
 
Further details can be found on the delivery section of our webpage.